Today, Cellphone-Mate, one of the leading manufacturers of cell phone signal boosting equipment, unveiled three new 65dB signal amplifiers that will boost 2G, 3G and 4G for Verizon, AT&T & US Cellular, or T-Mobile (and most Canadian carriers) up to 10,000 sq ft.
If you've been waiting for a cell phone signal booster system that can boost voice and 4G data for your carrier, then the wait is over. UberSignal is excited to announce three new omni signal booster kits that take advantage of the new Cellphone-Mate amplifiers, the
SureCall Tri-Flex-V for Verizon, the
SureCall Tri-Flex-A for AT&T and US Cellular, and the
SureCall Tri-Flex-T for T-Mobile and Canadian Carriers, and are priced at an amazingly low $999.95.
You can read the full press release from Cellphone-Mate below for more information:
Cellphone-Mate Announces 2G-4G Cell Reception Solution For All Three Major Carriers: Verizon, AT&T, and T-Mobile
Furthering its global footprint, leading amplifier manufacturer introduces industry's first Tri-band amplifier for homes and small office buildings. All Cellphone-Mate solutions significantly improve cellphone reception across all carriers.
FREMONT, Calif., March 12, 2013 /PRNewswire/ -- Cellphone-Mate, (www.surecall.com), the innovation leader in cellular amplifier technology, today announced that the company has been FCC certified for the TriFlex V (Verizon), TriFlex A (AT&T) and the Tri-Flex T (T-Mobile) Tri-Band Amplifier for T-Mobile's enhanced 4G and Canada's 4G frequency. All Cellphone-Mate solutions significantly improve cellphone reception across all carriers.
The Tri-Flex family of amplifiers is part of the Enhance™ Series of SureCall residential and home office amplifiers and is the industry's first tri-band cellular enhancement solution for 2G-3G voice and 4G data transmission. The completely integrated amp combines Cellular, PCS, LTE or AWS bands into one easy-to-install box. The compartmentalized design of Cellphone-Mate's smaller amplifiers eliminates signal interference, oscillation and increases efficiency. All three amps support all U.S cellular standards and the Tri-Flex T also supports Canadian 4G providers, including Bell, Rogers, and Telus.
"We're extremely pleased with the FCC and IC certifications for as we introduce the Tri-Flex family," says Hongtao Zhan , CEO for Cellphone-Mate. "The Tri-Flex series enables us to bring the best available solution to the people of the U.S and Canada. The offering covers all 2G-4G bands and technologies, including LTE, AWS, and HSPA(+). We look forward to developing more industry-leading solutions as our relationship with Canadian consumers and businesses continue to mature."
As with all Cellphone-Mate products, all three Tri-Flex amps will be affordably priced with an MSRP of $899.00. This full-featured booster includes manually adjustable gain control with dials for each band and automatic shutdown for maximum flexibility. The unit covers up to 10,000 square ft. (929M2) with an impressive signal. Kits with omni-directional indoor antennas or directional indoor antennas will also be available with an MSRP of $1,215.00. These amplifiers are available to purchase through Cellphone-Mate's network of resellers and distributors in the U.S and Canada.
Special Features Include:
- High integration and low cost
- Patent pending
- Reconfigurable tri-band
- 65dB gain manually adjustable
- Features automatic shutdown to prevent interference to cell phone towers
- Tower proximate technology
- Supports Canadian 2G, 3G and 4G standards and T-Mobile U.S. 2G, 3G and 4G standards
- Supports multiple users
- Oscillation detection and prevention
To complement its strong feature set, the Tri-Flex T has been developed utilizing propriety technology resulting in a unique list of technical specifications.
|
Frequency
|
Uplink: 1850-1910 Downlink: 1930-1990
|
|
Uplink: 824-849 Downlink: 869-894
|
|
Uplink: 1710-1755 Downlink: 2110-2155
|
|
Input Impedance
|
50 ohm
|
|
Average Gain
|
65dB
|
|
Maximum Gain
|
70dB
|
|
VSWR
|
< or = 2.0
|
|
Standards Supported
|
LTE, HSPA(+), WCDMA, CDMA, GSM, UMTS, EVDO, EDGE
and all other standard cell phone networks
|
|
AC Power Transformer
|
Input AC110V, 60Hz; Output: DC12V/6V
|
|
Carriers Supported
|
T-Mobile, Bell Mobility, Rogers Wireless, Telus Mobility, Mobilicity,
Videotron, Wind Mobile.
|
|
Maximum RF Output Power
|
3W EIRP – Cellular, 2W EIRP – PCS, 3W EIRP – LTE, 1W EIRP - AWS
|
|
Noise Figure
|
7dB
|
|
Cable
|
CM400 recommended
|
|
RF connectors
|
N Female connectors on both ends
|
|
Power Consumption
|
<30W
|
|
Dimensions
|
8.5" x 6.25" x 1.5" (21 cm x 16 cm x 3.8 cm)
|
|
Weight
|
3 lbs (1.4 kg )
|
